by cliffsur » Wed Jun 17, 2015 8:30 pm
The router assigns a local IP address only when the original parallella SD card is inserted. With the supercomputer.io downloaded image on an SD card, I am unable to see the Parallella board at all. I thought perhaps the downloaded image contained an IP address which would be broadcast when the board was booted up. It's beginning to look as though the image has not been correctly burned to the SD card, but everything looked to have been completed correctly. I shall go back and download the image again and follow the instructions to burn the image again, then try to get it on line.
Thank you for your patience.