So after racking my brain trying to figure this out I realized the board was pretty hot. I thought the passive cooling would be enough for a hello world example. I threw the board in my fridge for a few minutes, then reran this and it ran fine.
I'm still not 100% sure but I'll try putting a fan over the heatsink to see how it works.
hello world example problem
by louloizides » Sat Apr 04, 2015 11:01 pm
- louloizides
- Posts: 26
- Joined: Fri Mar 20, 2015 11:53 am
... but at least it works 