hdmi working
Posted: Thu Dec 26, 2013 5:50 am
>> magorian wrote: So the Parallella hdmi applies screen blanking but the monitor only shows "Not Optimum mode: recommend 1920x1280".
> shodruk wrote: Parallella's screen resolution is 1024x768 for now, so you have to use a monitor that supports 1024x768. Please try to boot without connecting HDMI,
> then connect HDMI after booting.
Well, given the extreme fragility of the uHDMI and uUSB connectors used with stiff adaptors, that seems like a recipe for tearing them out (one key/mon uUSB already tore off the board and I wasn't pushing the adapter cable hard). Connecting the hdmi after booting, one board has frozen text output on the uHDMI and the other nothing, so I would say that my uHDMI output seems nonfunctional in the stock release out of the box, and you have to use ssh and vnc.
Dan
> shodruk wrote: Parallella's screen resolution is 1024x768 for now, so you have to use a monitor that supports 1024x768. Please try to boot without connecting HDMI,
> then connect HDMI after booting.
Well, given the extreme fragility of the uHDMI and uUSB connectors used with stiff adaptors, that seems like a recipe for tearing them out (one key/mon uUSB already tore off the board and I wasn't pushing the adapter cable hard). Connecting the hdmi after booting, one board has frozen text output on the uHDMI and the other nothing, so I would say that my uHDMI output seems nonfunctional in the stock release out of the box, and you have to use ssh and vnc.
Dan