Parallella Community

Thanks Claggy!

And since Shodruky asked for it, here it is spookin' a bit



Maybe I'll get to the programming stuff after the weekend ....

Cheers, Mike.

( edit ) That's two LED's in parallel and at 5V - tapped off the USB - for these ones you need around 120 Ohms in series to cut their voltage drop to nominal at ~ 3.2V

Great! That's super cool both in looking and temperature!
I'm using desktop fan but it's very obtrusive.
I want that!

Hi guys,

Please check my post viewtopic.php?f=45&t=901 -

Can you please confirm that when the Parallella arrives it's declared as of a value of ~$00 and is actually shown as sent from "CFSMALL.COM X 02766 NORTON" and anyhow it's a 314 gram brown parcel?

Into the EU I got mine from Deutsche Post however the delivery note here is clear it's from the USA per the above.

Thanks!

Yey, it's it I will come with some great news for you in a couple of minutes -

There are a few pictures of my board in a

Next up: make a case for it!

Cheers,

Andrew

Thank you, Andrew.
I too want to make a case urgently.

I'll point out that after giving my E16 a good thrashing, with two heatsinks as per prior pic's, the temperatures are rock steady in the mid 30's ( Celsius ) - say 34 to 36 - for both the Zynq and Epiphany. I used a medical grade IR radiometer type probe.

Cheers, Mike.

Anyone know where I might source a second heatsink for my board, as I have yet to find one online with the correct dimensions?

My other Parallella has got on them. These are a bit bigger, in area, than the Zynq and Epiphany chips that they sit upon and have worked well thus far. I'd still recommend some fan involvement in addition though.

Cheers, Mike.