Page 1 of 1
Ethernet stuck at 1000M (ie. not working at 100M)
Posted:
Sat May 11, 2013 8:29 am
by tnt
Hi,
When re-creating a SD card using the files from
ftp://ftp.parallella.org/parallella/ the embedded ethernet port seems stuck at 1G and doesn't work when plugged in 100M ports.
Cheers,
Sylvain
Re: Ethernet stuck at 1000M (ie. not working at 100M)
Posted:
Fri May 24, 2013 12:18 pm
by tnt
So nobody tried to rebuild the image ?
Re: Ethernet stuck at 1000M (ie. not working at 100M)
Posted:
Mon May 27, 2013 9:11 pm
by tnt
Re: Ethernet stuck at 1000M (ie. not working at 100M)
Posted:
Tue May 28, 2013 1:50 am
by aolofsson
We'll take a look at the updated device tree for Parallella to see how it compares to the old zedboard version. Really sorry that we couldn't be the ones to locate the issue...
Andreas
Re: Ethernet stuck at 1000M (ie. not working at 100M)
Posted:
Tue May 28, 2013 6:55 am
by tnt
Well I'm sure you must all keep busy trying to get the board shipped :p
Do you know if all the chips on the parallella have public available dataheets or are some of them under NDA only ?
Re: Ethernet stuck at 1000M (ie. not working at 100M)
Posted:
Tue May 28, 2013 12:58 pm
by aolofsson
Marvell part is the only one under NDA. Here are the part numbers for the major ICs on the board...
XC7Z010-1CLG400C
N25Q0128A13EF840
88E1318-A0-NNB2C000
MT41K256M32SLD-125:E
E16G301
ADV7513BSWZ
ISL9307IRTAANFZ-T
ISL9305IRTHWCNYZ-T
USB3320C-EZK-TR
Andreas