How to get rid of opencl debug messages ?

Moderator: dar

How to get rid of opencl debug messages ?

Postby censix » Sat Jun 14, 2014 7:05 am

My kernels execute successfully and I am at a stage were I would like to get rid of the (debug?) messages produced
by libcoprthr_opencl, such as:

(0,0) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(0,1) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(0,2) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(0,3) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(1,0) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(1,1) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(1,2) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(1,3) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(2,0) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(2,1) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(2,2) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(2,3) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(3,0) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(3,1) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(3,2) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
(3,3) 4 4 4 4 4 reg: config=0x0 status=0x51 pc=0x8e0005c2 imask=0x3ff ipend=0x0
....

Could someone help by pointing out to me where I can disable this ( i.e. when rebuilding the Epiphany SDK + BDT libs from source ?)

Many thanks!
censix
 
Posts: 49
Joined: Sun Dec 16, 2012 7:54 pm
Location: europe

Re: How to get rid of opencl debug messages ?

Postby syedshabihhasan » Sun Oct 26, 2014 8:13 pm

I have been working with a couple of friends on a project and were wondering the same thing. Any answers would be much appreciated.
syedshabihhasan
 
Posts: 1
Joined: Sun Oct 26, 2014 8:10 pm


Return to OpenCL

Who is online

Users browsing this forum: No registered users and 7 guests

cron