Page 2 of 4
Re: DIY Source for Samtec Connectors?
Posted:
Mon Oct 14, 2013 8:56 pm
by Sundance
Hi,
Sundance can help... - We do this for a living and will only charge for materials and handling in the interest of REAL applications for Epiphany-based solutions. The PCBs will have to on a panel and the most expensive part is the solder-paste stencils.
Contact me by email, please - if you #tnt (or others!) want to take this forward
Rgds
Flemming
Re: DIY Source for Samtec Connectors?
Posted:
Fri Oct 18, 2013 6:50 pm
by mark03
tnt, and whomever else is working on daughtercards / breakout boards:
Before I embark on making a footprint for those Samtec BTH connectors in kicad or geda, does one of you already have one?
Thanks,
Mark
Re: DIY Source for Samtec Connectors?
Posted:
Fri Oct 18, 2013 9:27 pm
by tnt
No, not for those packages.
As I mentionned the eagle files are XML so they could possibly be processed automatically by a script. Also SAMTEC itself publishes data of footprint as ascii txt files which you can re-use in scripts.
Cheers,
Sylvain
Re: DIY Source for Samtec Connectors?
Posted:
Sat Oct 26, 2013 1:02 am
by petr_cvek
Re: DIY Source for Samtec Connectors?
Posted:
Sat Oct 26, 2013 9:58 am
by shodruk
Is there any protection circuit?
Re: DIY Source for Samtec Connectors?
Posted:
Sun Oct 27, 2013 1:00 pm
by tnt
Re: DIY Source for Samtec Connectors?
Posted:
Mon Oct 28, 2013 11:45 am
by shodruk
I'm noob in electronics, so I'm worried about breaking my Parallella.
and I was scared after reading this article.
Re: DIY Source for Samtec Connectors?
Posted:
Sun Nov 17, 2013 9:50 am
by shodruk
I've learned buffer IC will help me.
Which buffer IC is suitable for Parallella's GPIO?
Re: DIY Source for Samtec Connectors?
Posted:
Thu May 08, 2014 3:40 am
by DarcyThomas
I did find these
It uses a samtech connector; and has a similar purpose.
I *think* it would be compatible.
But you would need to double check the gender and pin outs.
Re: DIY Source for Samtec Connectors?
Posted:
Thu May 08, 2014 7:20 am
by 9600