Parallella Community

I've just pushed a first version of a eagle library for the parallella.

It contains :
- The raw connector as separate device
- The full parallella rev 0
- The full parallella rev 1

https://github.com/smunaut/parallella-h ... llella.lbr

Cheers,

Sylvain

This is very cool and thanks for publishing the library!

I was wondering whether we ought to have a repo under github.com/parallella to collect together contributed libraries in the various tool formats, and perhaps other daughter card design related resources. Thoughts?

EDIT: just spotted its in your fork of parallella-hw. So, perhaps we should just take contributions in here.

Cheers,

Andrew

Yes, I though about making a repo but then I realized that the parallella-hw would be better suited. I'd like for someone else than me to review the lib before I submit it for inclusion in the official repo though :p

Cheers,

Sylvain

Physical PCB would only test part of the lib (just that the connectors are at the right place, not at all which pin is which) and you could only do it for the R0 anyway since there is no R1 physically yet ...

So I think the next step is just peer review. Then some R0 physical tests ...

This is great News!
Thank you.

Michael.